Behringer Minicom COM800 Manual de usuario descargar pdf (Pagina 14)

MINICOM COM800

5. INSTALLATION

5.1 Connection options and audio connections

There are various ways to integrate the COM800 into your set-up. Depending on the application in

question, you will need different sets of connecting cables.

5.1.1 The MINICOM in the insert path

Connect the MINICOM via the insert paths of a mixing console if you want to compress individual

signals or sub-groups comprising several instruments. Use standard insert cables. These Y cables

have two 1/4" TS connectors at one end, and one 1/4 TRS connector at the other. Connect the plug

marked Send to the INPUT L jack of the COM800. Connect the Return plug to the corresponding

OUTPUT L jack of the device. Connect the TRS connector to the insert jack of the channel strip on

the mixing console.

For sub-group stereo compression use two insert cables and select a suitable preset. The second

cable must be connected to the INPUT/OUTPUT R jacks of the COM800.

Fig. 5.1: Connecting the MINICOM to the insert paths

Fig. 5.2: Insert cable with one 1/4" TRS and two 1/4" TS connectors

5. INSTALLATION

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Sin comentarios

Behringer Minicom COM800 Manual de usuario Pagina 14